Lantronix
ION x6010 User Guide
33493 Rev. F
Page 139 of 261
CLI Messages
The following are messages that may appear during CLI (Command Line Interface) operations.
Ambiguous command
2)
This message indicates either a) the input for one of the parameters is incorrect, or b) a hyphen
is missing between two parts of the command.
1.
Verify the CLI command syntax.
2.
Retry the operation.
B
. You typed part of a valid CLI command and pressed
Enter
before completing the command syntax.
For example, if you type
C1|S7|L1D>
add v
and then press the
Enter
key, the message “
% Ambiguous command.
” Displays.
1.
Type the part of the command that failed (
add v
in the example above), type a question mark (
?
),
and the press
Enter
. The valid commands that start with the part of the command you initially
entered are displayed.
2.
Verify the CLI command syntax.
3.
Retry the operation.
C
. The system was unable to resolve the desired command based on the portion of the command
entered. For example, you entered the following: C1|S7|L1D>
set dot1
1.
Verify the command syntax.
2.
Retry the CLI command syntax.
3.
See “
Section 6: Command Line Interface (CLI) Reference
”.
4.
If the problem persists, contact Technical Support.
Bad advertisement capability!
This message indicates that the capabilities specified for the Set Ethernet Port Advertisement Capability
command are not valid choices.
1.
Verify the command syntax.
2.
Retry the operation. See “
Section 6: Command Line Interface (CLI) Reference
”.
3.
If the problem persists, contact Technical Support.
