Lantronix
ION x6010 User Guide
33493 Rev. F
Page 215 of 261
DIP Switch SW2 – Fiber Loopback Test –Normal - - Copper Loopback Test Mode
DIP Switch SW2 selects between Fiber Loopback test mode, Normal operating
mode, and Copper Loopback test mode. The Normal (center) position is the
default setting.
SW2 Loopback Switch
:
1 – Copper Loopback (
CL
).
2 – Normal Operation (center position). No loopback (default setting).
3 – Fiber Loopback (
FL
). Enable loopback on the local fiber interface.
Jumpers J1, J5, J9, J14, and J15 are not configurable in the field.
X6010-10xx
PCB (
C6010 with SFP and BNC)
PCB
: 11381 Rev. A (information is silkscreened at the top center of the PCB).
Figure 21: x6010-10xx Layout
Differences from 11354_03: 1. Add BNC connector; 2. Change Fiber connector to SFP; 3. Add R143. See
the previous section for DIP switch and Jumper information.
