Lantronix
ION x6010 User Guide
33493 Rev. F
Page 78 of 261
Editing the Config File (Optional)
In some circumstances you may need to edit the backup Config file before restoring it. For example, you
may want to globally change the FDB IDs or other addressing.
The procedure below provides steps typically used in editing a Config file.
1.
Complete the applicable Backup procedure from the previous section.
2.
Open the Config file (in Notepad, WordPad, Word, OpenOffice Writer, etc.) from the TFTP server
location (e.g., C
:\TFTP-Root\1-9-C6010-1040.config
).
3.
Edit the Config file sections. Each Config file contains a DEVICE LEVEL CONFIG section and two
PORT x CONFIG sections.
4.
Save the edited Config file back to the TFTP server location (e.g., C
:\TFTP-Root\1-9- C6010-
1040.config
).
5.
Continue with the applicable Restore procedure from the following section using the edited
Config file.
A sample portion of a typical Config file is shown below.
[DEVICE LEVEL CONFIG]
set system name=”C6010-1040”
set circuit-ID=””
[PORT 1 CONFIG]
set taos transmit=enable
set circuit-ID=””
[PORT 2 CONFIG]
set taos transmit=enable
set circuit-ID=””
