Lantronix
ION x6010 User Guide
33493 Rev. F
Page 110 of 261
Command
:
Log Out (Quit)
Syntax
:
q
(uit)
Description
: Exit the current mode and return to the previous mode (the command line prompt).
Example
:
C1|S3|L1D>
q
login:
Note
: At IONMM FW v 1.3.14 and before, the ION System does not automatically log out upon exit or
after a timeout period, which could leave it vulnerable if left unattended. Follow your organizational
policy on when to sign out.
At IONMM FW v 1.3.15 and above, a 15 minute inactivity timeout was added. Also note that at login, a
timestamp is shown while the page loads.
Command
:
Help (?)
Syntax
:
?
Description
: Displays all available command line commands.
Example
:
A
?
(Help) command listing is shown below.
C1|S4|L1D>
?
add Add a ACL condition.
Clear Clear all counters of the specified Ethernet port.
Cls Clear the screen.
Go Set the location to device/port of the SIC to be operated.
Home Go back to the IONMM card.
List Display a list of all available commands.
Ping Send ICMP ECHO-REQUEST to network hosts.
Prov Get / set current TFTP server address.
Ps Report a snapshot of the current processes.
Pwd Show current directory.
Quit Exit current mode and down to previous mode.
Reboot Warm start the system.
Reset Reset all ports counters/factory defaults/uptime.
Set Set AIS, Circuit-ID, DMI, etc.
show Show AIS, DMI, TDM information.
Start Start TDR test of the specified Ethernet port.
Stat Show topology information of the chassis.
Tftp Get/put/upgrade a file from via TFTP server.
Update Update a firmware database file.
Upgrade Upgrade firmware modules.
C1|S4|L1D>
