Lantronix
ION x6010 User Guide
33493 Rev. F
Page 47 of 261
Note
: Use the
stat
command to display the current ION chassis/card/port/remote device configuration.
AgentIII C1|S1|L1D>
stat
ION statck
Chassis – BPC
[ 1] IONMM
Port 1
Port 2
[ 2] C6210-3040
Port 1
Port 2
[ 3] C6120-1013
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
[ 5] C6010-3040
Port 1
Port 2
level2 REM: S6010-1040
Port 1
Port 2
For more information, see the Status check (
stat
) command in “
Section 6: Command Line Interface (CLI)
Reference”.
To switch command control from the local slot 4 C6010-3040 to its level 2 remotely-connected device
(S6010-1040) in the
stat
command example above, you would enter:
C1|S4|L1D>
go c=1 s=4 l1ap=2 l2d
Command control would be shown by the command line prompt:
C1|S4|L1AP2|L2D>
To switch command control to port 1 of the level2 REM: S6010-1040 above, you would enter:
C1|S4|L1AP2|L2D>
go l2p=1
Command control would be shown by the command line prompt:
C1|S4|L1AP2|L2P1>
