Lantronix
ION x6010 User Guide
33493 Rev. F
Page 230 of 261
Message
:
Please confirm the modem/port selection in the following dialog. (This session either had no
previous selection or that selection is absent from your TAPI configuration.)
Response
:
1.
Verify the HyperTerminal configuration. See “
Configuring HyperTerminal
“(e.g., verify your
com-
puter’s Ports (COM & LPT
) setting).
2.
Use the
Computer Management
> Device Manager
>
Troubleshooter
button located on the
General
tab in
Properties
.
3.
Unplug and re-plug the USB connector on the NID.
4.
Retry the operation. See “
Start a USB Session in HyperTerminal and Log In
“.
5.
If the problem persists, contact Technical Support.
