Lantronix
ION x6010 User Guide
33493 Rev. F
Page 54 of 261
Reboot, Reset, and Power Off Function Notes
Certain functions such as a System Reboot, Reset to Factory Configuration, Reset Power to a Slot, and
Power Off a Slot) cause the system to delete certain stored files.
Caution
: In some circumstances, these
stored files are lost unless you first perform a System Backup. See the “
Backup and Restore Operations
”
section for information on how to save the stored files from deletion.
For more information on how the Reboot, Reset, and Power Off functions impact stored files, see:
•
Table 17.
Back Up and Restore File Content and Location
•
Table 18.
File Status after a Reset to Factory Defaults
•
Table 19.
File Content and Location after a System Reboot
•
Table 20.
File Content and Location after a Firmware Upgrade
Doing a reboot, restart or upgrade of the IONMM, a power restart of the chassis, or a reset
to factory removes temporary files (e.g. configuration backup files, Syslog file). A Factory Reset also
removes the permanent settings (e.g. configuration files, HTTPS certification file, SSH key).
System Reboot
Clicking the
System Reboot
button resets all system states and reinitializes the system; all configuration
data is saved during a restart.
Press the
Cancel
button if you are not sure you want a system reboot to occur.
Press the
OK
button to clear the webpage message and begin the reboot process. The message
“
Loading, please wait...
displays.
Note that a System Reboot can take several minutes.
