Lantronix
ION x6010 User Guide
33493 Rev. F
Page 137 of 261
Cannot make x6010 configuration changes from the Web interface
GUI is not accessible
Web interface screens are all grayed out
With the x6010 in Hardware mode, you cannot make x6010 configuration changes from the Web inter-
face, as the screen fields are all grayed out.
1.
Change the x6010 PCB J8 jumper setting. Jumper J8 sets the x6010 PCB’s Hardware / Software
mode. Use the shorting plug to jumper (short) pins 2 and 3 for Software Mode. See “
Jumper
Setings
“.
2.
Collapse and then expand the ION System tree (i.e., fold and then unfold the “ION Stack” node in
the left tree view) to refresh.
3.
Select the x6010 again, and continue operation.
4.
Use CLI commands for configuration and operation. See “
Section 6: Command Line Interface (CLI)
Reference
”.
5.
Contact Lantronix for more information.
