Lantronix
ION x6010 User Guide
33493 Rev. F
Page 148 of 261
Unknown command!
The command you entered is not supported, or you entered the wrong command format / syntax.
1.
Verify the CLI command syntax.
2.
Retry the operation.
3.
See “Section 6: Command Line Interface (CLI) Reference”.
4.
If the problem persists, contact Technical Support.
There is no matched command.
The command you entered is not supported, or you entered the wrong command format / syntax.
1.
Verify the CLI command syntax.
2.
Retry the operation.
3.
See “Section 6: Command Line Interface (CLI) Reference”.
4.
If the problem persists, contact Technical Support.
Error location parameter number!
The
go
command you entered had an invalid or missing parameter.
1.
Enter the
go
command with all of the location parameters (chassis / slot / port) in the format:
go [c=CHASSIS] [s=
SLOT
] [l1ap=
PORT
] [l2ap=
PORT
] (l1p=
PORT
|l2p=
PORT
|l3p=
PORT
|l1d|l2d|l3d)
tftp get: set address type failed.
Tftp put failed.
Tftp transfer failed!
1.
The attempted firmware upgrade via the
tftp upgrade
command was unsuccessful.
2.
Verify the CLI command syntax.
3.
Verify the firmware version.
4.
Be sure the TFTP server is configured and running.
5.
Check that the remotefile is in the proper location (e.g., the file
x6010.bin.0.5.4
is at
C:\TFTP-Root
).
6.
Retry the operation. See the
tftp upgrade
command in “
Section 6: Command Line Interface (CLI)
Reference
”.
7.
If the problem persists, contact Technical Support.
