Lantronix
ION x6010 User Guide
33493 Rev. F
Page 149 of 261
Fail to transfer the file!
The file transfer attempt failed. The command you entered to do a tftp file transfer was unsuccessful
(e.g.,
tftp get
or
tftp put
or
tftp transfer
).
1.
Check the command syntax. See “
TFTP Commands
” page.
2.
Make sure the TFTP server is configured and running.
3.
Verify the filename to be transferred and the IP address of the TFTP server.
4.
If the problem persists, contact Technical Support.
Redundancy is not supported on this card!
The attempt to set or show fiber redundancy failed. For example, you entered the command
show re-
dundancy info
, but the device does not support fiber redundancy.
1.
Verify that the NID you entered the command on supports this function (must have at least 2 fiber
ports).
2.
Retry the operation on a card that supports this function. See the “
Fiber Redundancy Commands
”
section.
3.
If the problem persists, contact Technical Support.
Invalid user!
You entered a show command, but specified the wrong user (e.g., you typed
admin
instead of
root
).
1.
Retry the operation using the correct user information.
2.
If the problem persists, contact Technical Support.
Upgrade is only supported on IONMM card!
You entered a firmware
upgrade
or firmware
update
command from a device other than the IONMM.
For example:
C1|S3|L1D>
show firmware upgrade result
C1|S3|L1D>
show firmware-db update result
C1|S3|L1D>
show upgrade firmware file
C1|S3|L1D>
update firmware-db file cert
C1|S3|L1D>
upgrade module
1.
Make sure of the command you want to enter. See “
Firmware Upgrade Commands
”.
2.
Use the
home
command to go to the IONMM device.
3.
Re-enter the firmware upgrade command from the IONMM.
4.
If the problem persists, contact Technical Support.
