Lantronix x6010, User Manual

Page: 118 / 261

Lantronix ION x6010 User Guide
33493 Rev. F https://www.lantronix.com/ Page 118 of 261
Command :
Prov Get TFTP Server Address
Syntax :
prov get tftp svr addr
Description : Accesses the TFTP server’s IP address.
Example
:
C1|S4|L1AP2|L2D> prov get tftp svr addr
C1|S4|L1AP2|L2D>
Command : Prov Set TFTP Server Address
Syntax: prov set tftp svr type
Description : Defines the TFTP Server IP address for TFTP server operations.
Example :
C1|S4|L1AP2|L2D> prov set tftp svr type ipv4 addr 192.168.1.30
C1|S4|L1AP2|L2D>
Command : Set Circuit ID
Syntax : set circuit-ID =<xx> <cr>
Description : Lets you define an ASCII text string up to 63 bytes and override the default Circuit ID,
which is vlan-module-port in binary format, for a device and/or device ports, where:
xx = an ASCII text string up to 63 bytes
Example :
C1|S4|L1D> set circuit XX/YYYY/000000/111/CC/SEG
C1|S4|L1D> show circuit-ID
Circuit-ID: XX/YYYY/000000/111/CC/SEG
The default setting is ‘blank’ (no data entered).
Note : Use the show circuit-ID command to display the Circuit ID information for a device or port.
Command : Show Circuit ID
Syntax : show circuit-ID <cr>
Description : Displays the current Circuit ID (ifxtable or system table) for the device or port. Use the
set circuit-ID command to change the current Circuit ID information defined for a
device or port.
Example :
C1|S4|L1D> set circuit XX/YYYY/000000/111/CC/SEG
C1|S4|L1D> show circuit-ID
Circuit-ID: XX/YYYY/000000/111/CC/SEG
Note : If no circuit ID has been defined via the set circuit-ID= command, nothing displays after the
“Circuit-ID:”.