Lantronix
ION x6010 User Guide
33493 Rev. F
Page 159 of 261
Long Command Causes Cursor Wrap to Same Line
When the input command reaches the input max length, the cursor does not return to the next line, but
goes back to the beginning of the same line, overwriting the original data.
1.
Press the
Enter
key towards the end of the command string and continue entering command text.
2.
Try using HyperTerminal or the Web interface, at least temporarily.
3.
Contact Lantronix for more information.
Cannot create VLAN database on this card!
This model of NID does not support the VLAN database. For example:
C1|S7|L1D>
add vlan-db vid 2 priority=5 pri-override=enable
Cannot create VLAN database on this card!
C1|S7|L1D>
1.
Make sure this is the function that you want.
2.
Use the go command to switch to a NID that supports the VLAN database.
3.
Re-enter the
add vlan-db
command.
4.
If the problem persists, contact Technical Support.
