Lantronix
ION x6010 User Guide
33493 Rev. F
Page 174 of 261
Link Status:
NotPresent
: the interface has missing components (typically hardware).
1.
Verify the ION system installation; see “
Section 2: Installation and System Setup
“.
2.
Wait several minutes for initialization and discovery to take place, and then retry the operation.
3.
If the problem persists, contact Technical Support.
Link Status:
Testing
:
The ION system interface can not pass operational packets.
1.
Verify that diagnostic tests were run properly and completed successfully.
2.
Wait several minutes for initialization and discovery to take place, and then retry the operation.
3.
If the problem persists, contact Technical Support.
Setting values failed (http server error)
This message indicates a configuration entry error (e.g., https).
1.
Enter a valid value. Refer to the Help screen for more information.
2.
Retry the operation. See “
Configuring HTTPS
”.
3.
If the problem persists, contact Technical Support.
Setting values failed (snmp operation error)
This message indicates that the SNMP Configuration entered had an invalid SNMP entry (e.g., an
unrecognized Trap Manager address entry).
1.
Enter a valid value. Refer to the Help screen for more information.
2.
Retry the operation. See the related section of this manual.
3.
If the problem persists, contact Technical Support.