Lantronix
ION x6010 User Guide
33493 Rev. F
Page 202 of 261
Error: Get DMI Vendor revision no such object.
Error: Get DMI Vendor date code no such object.
Error: Get DMI Vendor SFP type no such object.
Error: Get DMI Vendor OUI no such object.
DMI Receive power intrusion threshold: 10*uW
Agent III C1|S8|L1P2>
The DMI tab fields are described in Table 14
later in this section.
DMI Config – Web Method
1.
Access the x6010 through the Web interface (see
“Starting the Web Interface”
).
2.
Select the desired device and port.
3.
Select the
DMI
tab.
The Interface Characteristics, Diagnostic Monitoring, and Supported Media Length sections display.
See the table below for individual field / parameter descriptions.
4.
Set the “
Rx Power Intrusion Threshold
” as required. This is a preset level for Rx Power on the Fiber
port; if the DMI read value falls below the preset value, a potential intrusion is detected, and a trap
is generated. The valid range is 0 –
65535 μW. The default is 0.
5.
Click the
Save
button to save any updated information.
6.
Click the
Refresh
button to update the information displayed.
7.
If the message “
ALARM: Receive power is below specified threshold. Fiber trap intrusion may be in
progress.
” Displays, follow your organization’s process for intrusion detection.
