Lantronix
ION x6010 User Guide
33493 Rev. F
Page 152 of 261
Fail to get system name!
You entered a command for system information, but the information on the card was not available.
For example:
C1|S10|L1D>
show card info
Fail to get system name!
1.
Try entering the
show cardtype
command.
2.
Select the
MAIN
tab >
System Configuration
section
> System Name
field, and verify the name and
for the device.
3.
Use the set system name command to enter the
System Name
information (e.g.,
set system
name
=NAME).
4.
Remove and reset the card.
5.
Try the operation again.
6.
If the problem persists, contact Technical Support.
Set system name timeout.
You entered a command to define system information, but the information on the card was not ac-
cepted.
For example:
C1|S10|L1D>
set system name C3231
Set system name timeout.
1.
Use the set system name command to enter the System Name information (e.g.,
set system
name=NAME
) without any special characters (e.g., without the ! or # or % or & characters).
2.
Remove and reseat the card.
3.
Try the operation again.
4.
Select the
MAIN
tab >
System Configuration
section
> System Name
field, and verify the name and
for the device.
5.
If the problem persists, contact Technical Support.
