Lantronix
ION x6010 User Guide
33493 Rev. F
Page 176 of 261
There is a problem with this website’s security certificate.
This message indicates that the security certificate presented by this website was changed.
1.
Click the
Continue to this website...
selection.
2.
See the “
Configuring HTTPS
” section.
3.
If the problem persists, contact Technical Support.
Web UI Management connection Lost
1.
With the “Egress Rate Limit” set to “Unlimited”, the PC can ping the device (e.g., S2220-1013).
2.
After reducing the “Egress Rate Limit” to “80m”, the ping fails.
The return traffic to the PC is non-mgmt packet and is subjected to Egress rate-limiting, hence these
packets are getting dropped.
3.
Increase the port 1 “Egress Rate Limit” to “900m” or “800m” to reserve some Egress bandwidth for
user management traffic.
The PC can ping to S2220-1013 again, and the WEB UI can be managed again.
4.
If the problem persists, contact Technical Support.
Current power status of this slot is off, please turn it on before you reset it!
The reset function only works when the slot power is in the On position to have the unit to reboot/reset.
1.
At Chassis > MAIN > Chassis Members click the “On” button in the Power Status column of the
device before you click the “Reset” button.
2.
If the problem persists, contact Technical Support.
