Lantronix
ION x6010 User Guide
33493 Rev. F
Page 69 of 261
Configuring
TDM
Mode – Web Method
1.
Set DIP Switch SW4 switch #4 to the Down position for E1 mode. See “
DIP Switches
”.
2.
Go to the x6010
MAIN
tab and locate the
TDM Mode
field.
3.
At the
TDM Mode
dropdown, select the desired TDM mode. This is the current operating mode
of the x6010, either
T1
or
E1
. The operating characteristics include T1=1.544 MHz; E1=2.048
MHz; E3=34.4Mbps; DS3=44.7Mbps; STS-1=51.8Mbps.
4.
If desired, enter a new
System Name
.
5.
If required, enter a
Device Description
of up to 64 characters.
6.
Click the
Save
button.
7.
Select
Port 1
.
8.
If required, enter a
Circuit ID
of up to 64 characters.
9.
Configure the
Loopback Management
section as required.
