Lantronix
ION x6010 User Guide
33493 Rev. F
Page 55 of 261
Reset To Factory Config
Clicking the
Reset To Factory Config
button resets the entire system configuration to the state it was in
when it shipped from the factory. This permanently removes all current configuration details and loads
the system configuration with the factory default settings.
The message “
A factory reset will wipe out all current configuration and load the factory defaults along
with a system reboot; are you sure to proceed?
” displays.
You should only click
OK
if you wish to reboot. Otherwise, click
Cancel
if you are not sure you want a
factory reset / reboot to occur.
Reset Power to a Slot
The x6010 provides two Reset functions: a software reset and hardware reset. At the
Chassis
>
MAIN
tab, you can click the
Reset
button to reset power for
a specific
slot in the chassis. The message “
Are you
sure to power reset this slot?
” displays.
After power reset it will take a while to see card change in this slot; fold/unfold the Chassis node in the
tree panel to check the progress. If the card information changes on the Tree, then click the
Refresh
button on this page.
If you are not sure that you want to reset this chassis, click the
Cancel
button to clear the message and
return to normal operations without resetting power to this slot.