Lantronix x6010, User Manual

Page: 53 / 261

Lantronix ION x6010 User Guide
33493 Rev. F https://www.lantronix.com/ Page 53 of 261
Device-Level Menus
The table below describes the ION Web interface in terms of its device-level pane, dropdowns, tabs and
sub-tabs. Note that menus and tabs vary slightly by model.
Tab Description
MAIN Tab
Sections: Model Information, System Configuration, Device Description, and
TDM Mode sections.
Buttons: Uptime Reset , System Reboot , and Reset to Factory Config . Refresh,
Save,
and
Help.
Port-Level Menus
The table below describes the ION Web interface in terms of its port-level tabs and sub-tabs.
Table 7 : Port-Level Menu Description
Tab Description
MAIN Tab
Sections: Circuit ID, Port Configuration, and Loopback Management.
Port 1 Fields: Link Status, AIS Transmit, Transmit All Ones, Alarm Indication
Signal, Long Haul, Line Build Out, Connector Type, Loopback Type, Loopback
Status.
Port 2 Fields: Link Status, AIS Transmit, Transmit All Ones, Alarm Indication
Signal, Connector Type, Loopback Type, Loopback Status.
Buttons:
Refresh, Save, Start, Stop,
and
Help.
DMI
Tab
(Port 2 only)
Sections: Interface Characteristics, Diagnostic Monitoring, Supported Media
Length.
The DMI (Diagnostic Maintenance Interface) function displays NID diagnostic
and maintenance information such as interface characteristics, diagnostic
monitoring parameters, and supported media lengths. See “
DMI Test ” for more
information.
Note : not all NID or SFP models support DMI. If you click the DMI tab on a NID
model that does not support DMI, the message “
The DMI feature is not
supported on current port
.”