Lantronix x6010, User Manual, Page: 233 / 261

Lantronix ION x6010 User Guide
33493 Rev. F https://www.lantronix.com/ Page 233 of 261
Message
: Invalid location parameters, cannot find the physical entity !
Meaning : 1) The go command you entered includes a location that does not exist or that you entered
incorrectly. 2) The NID is in the process of a reset operation; wait one minute and then re-try the func-
tion.
Recovery :
1. Run the
stat
command to verify your configuration.
2. Click the plus sign [
+
] next to
ION Stack
to unfold the “ION Stack” node in the left tree view to
refresh device status.
3. Click the plus sign [+] next to
Chassis
to unfold the chassis devices.
4. Compare the stat command results to the Web interface tree view configuration information.
5. Re-run the stat command with the correct location parameters.
6. Ping the device in question.
7. Unplug and re-plug the USB connector on the IONMM card.
8. If the problem persists, contact Technical Support.
Message : Unknown command !
Meaning : The command you entered is not supported, or you entered the wrong command
format / syntax.
Recovery :
1. Verify the CLI command syntax.
2. See “ Section 6: Command Line Interface (CLI) Reference ”.