Lantronix
ION x6010 User Guide
33493 Rev. F
Page 73 of 261
Note on Remote (L2D) Module Backup, Restore, and Upgrade
When doing a remote (L2) module backup, restore, or upgrade, the related table displays two Module
numbers for the same slot. The first module is the chassis (local) device (e.g.,
[04]C6010-3040
shown
below). The second module listed is the standalone (remote) device (e.g.,
[04:L2]REM:S6010-1040
shown below).
Backing Up Slide-In and Remote Module Configuration
The following procedure describes how to back up the configuration of one or more slide-in or remote
modules in the ION system. The backup file is stored in x6010 memory.
1.
Access the IONMM through the Web interface (see
“Starting the Web Interface”
).
2.
Select the
BACKUP-RESTORE
tab. Select the
Backup
sub-tab if not already displayed.
3.
Verify that the TFTP Server address shown is correct, that the TFTP Server is running and configured,
and that the file to be downloaded is located correctly (e.g., at
C:\TFTP-Root
).
4.
Verify that the card list shown in the table is correct; if not correct, fold and then unfold the “ION
Stack” node in the left tree view to refresh.
5.
Note the
Prov
Status
field message (
Wrong Firmware
,
No Action
, etc.).
6.
In the
Select
column, check the checkbox of each module to be backed up.
