Lantronix
ION x6010 User Guide
33493 Rev. F
Page 79 of 261
Restoring Slide-In and Remote Modules’ Configuration
The following procedure describes how to restore the configuration of one or more slide-in or remote
modules in the ION system.
Note
: these Restore procedures require that the TFTP server be running and properly configured, and
that the backup configuration file is named and located properly.
IMPORTANT
A restore operation can only be performed for a module that had its configuration file backed up (see
Backing Up Standalone Modules
).
1.
Access the IONMM through the Web interface (see
“Starting the Web Interface”
).
2.
At the
BACKUP-RESTORE
tab, select the
Restore
sub-tab. The “Modules to Restore” table displays.
3.
If the card list shown in the table is not correct, unfold the ION Stack in the left tree view, and then
refold it to refresh the table information.
4.
In the
Select
column, check the checkbox of each module to be restored.
5.
Is the configuration file to be restored different than the one shown in the Config File column?
Yes
No
a)
In the
Config File
column, click the file name.
b)
Type the name of the backup file to be restored.
Note:
the file name must end with
.config
.
c)
Continue with
step 6
.
Continue with
step 6
.