Lantronix
ION x6010 User Guide
33493 Rev. F
Page 153 of 261
System is busy, please retry this command later!
You entered a
show
or
set
command, but the command was not accepted by the system. For example:
C1|S10|L1D>
show https config
System is busy, please retry this command later!
C1|S10|L1D>
1.
Wait 1-2 minutes and then retry the command.
2.
Reboot the system and then retry the command.
3.
If the problem persists, contact Technical Support.
Get HTTPS state no such object.
IP management state no such object.
You entered a
show
or
get
command, but the command was not accepted by the system. For example:
C1|S10|L1D>
show https config
HTTPS configuration:
Get HTTPS state no such object.
C1|S10|L1D>
show ip-mgmt config
IP management configuration:
IP management state no such object.
1.
Verify that the command is supported.
2.
Wait 1-2 minutes and then retry the command.
3.
Retry the command with different parameters or use the go command to switch to a device that
supports the desired command.
4.
If the problem persists, contact Technical Support.
Warning: this command will restart system, connection will be lost and please login again!
Warm start failed.
You entered a
reboot
command, but the reboot was unsuccessful.
1.
Wait 1-2 minutes and then retry the command.
2.
If the problem persists, contact Technical Support.
