Gima 35306, Manual, Page: 55 / 693

55
ENGLISH
Medium
ECG/SpO
2
Lead(s) off, SpO
2
Probe off, SpO
2
value exceeds measuring range
CO
2
CO
2
sensor off, need to perform zero resetting, CO
2
over detect value, check air
adapter, check sampling tube, CO
2
zeroing failed.
IBP IBP1 Probe off, IBP2 Probe off, IBP3 Probe off, IBP4 Probe off
CSM Electrodes off
Temp
Temp probe off
AG
Sidestream: No sampling line, Sampling line block
Mainstream: No adapter, Required to change adapter
Low
NIBP
Self-test failed, System error, Over time, Signal weak, Cuff error, Air leakage, Pressure
error, Out of range, Too much motion, Over pressure, Signal saturation, Detected air
leakage, BP exceeds measuring range,
TEMP Temperature self-detect failed, TEMP1/TEMP2 exceed(s) measuring range
SpO2 No pulsation
System AC-DC low voltage
Related to 3 levels alarm sources, medical and nursing staff should have different response to deal with potential dangers,
the detailed demands are as follows:
1. High priority alarm: medical and nursing staff should response immediately.
2. Medium priority alarm: medical and nursing staff should response quickly.
3. Low priority alarm: medical and nursing staff should response as soon as possible.
NOTE:
Some models may have only Medium and Low alarm priority because of the different configuration.
6.3 Alarm Indicators
When an alarm occurs, the monitor will indicate it to the user through visual or audible alarm indications.
6.3.1 Alarm lamp
Lamp color Alarm level
Red flashing High priority alarm
Yellow flashing Medium priority alarm
Yellow Low priority alarm
Green Normal