Gima 35306, Manual, Page: 29 / 693

29
ENGLISH
2.
: it means the printer error caused by no paper or malfunction;
3. During printing, the printer displays status (
, , )
showing that the printer is working.
Move the cursor on this icon can enter into Printer Settings.
Note:
If your monitor is not configured with Printer, then the icons will not be shown up.

Network connection status: there are 3 status --- “ “ means network connected; “ “ means network
disconnected; “ “(with a moving point) means network is connecting, if the network connection is lost, then the
device will try to connect to the central station every 2 minutes.
Move the cursor on this icon can enter into Network Settings.

Pulse beep status: there are 2 status --- “ “ means pulse beep is enabled; “ “ means pulse beep is disabled.
Move the cursor on this icon can enter into Beep Volume Settings.

Power supply status
“ “ means the battery is being charged;
“ (one grid)
/
(two grids)
/
/
/ “
indicates battery voltage;
“ “ means the device is powered by AC power supply.
“ “ means low battery voltage.

System time: the current time running in the device.
Note: operating key to move the cursor on statusbar and focus on the icon of printer, network, beep volume, power supply,
system time or on the information area, then the corresponding setting window pops up, that’s, Printer setting window,
Network setting window, Beep volume setting window, power supply setting window, System time setting window.
Popup window for Beep Volume setting
Popup window for Power Status