![background image](http://html1.mh-extra.com/html/gima/35306/35306_manual_2228144048.webp)
48
ENGLISH
The EMG color setting for number: setting range is 0~111, the default is 12.
The SQI color setting for number: setting range is 0~111, the default is 0.
The BS color setting for number: setting range is 0~111, the default is 91.
5.2 Display Views
A View can be configured in its Settings Window. To enter into the View Settings window for a certain view, the procedure
is: in the default screen, move the Navigation Knob on “Views” button, and select one of the view’s label (e.g. “Big Font”),
press “Settings”, then this view setting window (e.g. “Big Font View Settings” window) pops up on the screen.
Another way to enter the View Settings window is: when the specified view is the “Current View” on screen, then press
“View Setting key” to enter into the view settings window directly.
Select “Views” button to enter into “Views” window.
This monitor provides the following display views:
General view: meets most monitoring needs;
Big Font view: displays the important parameters in the big font for remote observation;
All ECG Trace view: emphasizes on all ECG waveforms;
NIBP List view: emphasizes on NIBP data;
RESP-oxy view: emphasizes on SpO
2
and Respiration data;
Short trends view: displays waveforms and parameters together with recent 2-hours parameter trend graph.
In a View Settings window, “Wave K” means “Waveform Channel No. K”, and “Param K” means “Parameter Panel No.
K”(K=1,2,…7), e.g. “Wave 2” is “Waveform Channel No. 2”, and “Param 3” is “Parameter Panel No. 3”.
5.2.1 General View
When power on the monitor, it enters into the defaulted General View screen. (Please refer to the monitor you purchased)
There are 5 traces of waveform in the left view: waveform for ECG lead III, ECG lead I, ECG lead II, SpO2 plethysmogram
and Respiration; And there are 5 panels in the right view: ECG, SpO
2
, NIBP, RESP and TEMP.
1) Description:
General View screen shows data and waveforms of main parameters.
Generally there are 5 traces of waveform in waveform area. The default first trace is the waveform for ECG lead II;
The second is the waveform for ECG lead III; The third is the waveform for ECG lead I; The forth is the waveform for
SpO
2
plethysmogram; And the fifth is the waveform for Respiration. The user can change it freely.
Generally there are 5 parameter panels. The default panel order from up to down is: HR, TEMP, NIBP, SpO
2
, RESP (or
CO
2
) and CSM and so on.
2) General View Settings:
Waveform Settings:
Settings of waveform channels and parameter panels can be changed easily.
Wave 1, Wave 2 and Wave 3
can be set as
Summary of Contents for 35306
