Gima 35306, Manual

Page: 100 / 693

100
ENGLISH

Use any accessories specified in this manual. Make sure that the accessories never come into contact with
conductive parts.
If your monitor is configured with Plugin C.O. Module, then you need to make sure that the C.O. Plug-and-Play box is
securely inserted. If the box is inserted successfully, then the C.O. icon appears on the upper right side of the screen.
Refer to the following description.
If your monitor is configured with internal C.O. Module, then the C.O. icon appears on the upper right side of the
screen.
14.3.1 Understanding C.O. Icon and C.O. Plugin Box (Optional)
Preparation--- C.O. Connection
C.O. Plug-and-Play box (Optional)
The optioned Plug-and-Play box can be only configured with C.O. Module, or configured with other modules, please refer
to the box in your hand. If the Plug-and-Play box is equipped with IBP function.
Plug-and-Play box
with C.O. function
Icon “C.O.” on the box is the C.O. connector, the connector maybe different because of the different configuration, please
refer to the box in your hand.
Note:

If you insert 2 same boxes into (eg. 2 boxes with C.O. function), then the second box will not be recognized. That’s,
the monitor can recognize at most one C.O., one CO
2
and 4 IBP. For some models, the icon “ “ will be displayed
on the screen if the C.O. function is recognized.
14.3.2 C.O. Measuring Procedure
1. Connect the cable to the C.O, connector on the monitor. connect the catheter and temperature probe to the C.O. cable
as shown in following Figure.