Gima 35306, Manual, Page: 26 / 693

26
ENGLISH
4). There are only 2 slots for the plugin modules, if you insert two same modules into the slots, then one of the modules
will be ignored.
Plugin module installation:
Step 1: If the user wants to add additional function (e.g. CO
2
monitoring), then insert the plugin module into the slot (L
or R side), please make sure the module is right side up. One beep sound means the module is inserted into the
monitor, and the indicator on module lights on meaning the plugin module is installed successfully.
Note: if the indicator on the module is off, then pull it out and repeat step 1 to reinstall.
Plugin module installing location:
(The figure is for illustration only, please refer to the monitor in your hand for actual appearance)
Description:
1). ---installing slots for Plugin modules, L or R side.
2). and : the Plugin modules for CO
2
and CSM functions. The indicator indicates the working status
of plugin module, blue light means the plugin module is working normal.
3). Description for the icons on Plugin module:

CO
2
: transducer connector for CO
2
function, it will be different for different configuration, please refer to the monitor
in your hand.

CSM: transducer connector for CSM function, it will be different for different configuration, please refer to the
monitor in your hand.
Plugin module
installing location