Gima 35306, Manual

Page: 112 / 693

112
ENGLISH
15.6 Understanding the AG Display
Waveform:
AG panel (optional):
Fraction of Inspired
CO
2
concentration
CO
2
concentration
at the end of tide
N
2
O concentration at the
end of tide
Primary anesthetic gas concentration
at the end of tide
Fraction of Inspired N
2
O
concentration
Respiratory rate The minimum alveolar
concentration
Secondary anesthetic gas
concentration
at the end of tide
Fraction of Inspired primary
anesthetic gas concentration
Fraction of Inspired secondary
anesthetic gas concentration
15.7 Changing AG Settings
Select “Menu”
→
“RESP” to enter into RESP related setting.
In RESP settings window, AG Settings can be entered if your monitor is configured with AG Monitoring.
On RESP Settings screen, there is AG Monitoring Switch : click it to turn on or off AG
Monitoring. It is recommended that the switch is turned on only when there is a need to monitor AG parameter. This can
not only reduce the power consumption and also extend the life of the AG measurement module.
In order to maintain the monitor’s service life, please set AG Monitoring switch at OFF state in system setup when AG
Monitoring function is not used.

: when AG monitoring function is turned on, then “CO
2
detection only” function can be
also turned on. Otherwise, it stays in grey and is nonadjustable. If “CO
2
detection only” function is selected, then all
settings for AA1 and AA2 stays in grey and is nonadjustable.