Gima 35306, Manual

Page: 51 / 693

51
ENGLISH
2) NIBP List View Settings:

Waveform 1 can be set as OFF or one ECG wave.

Waveform 2 and 3 can be set as OFF, SpO
2
, RESP (or CO
2
). The default is ECG II for Wave 1, SpO
2
for Waveform 2 and
RESP (or CO
2
) for Waveform 3.

Waveform 4 is nonadjustable, the default is NIBP List.

Parameter 1 and 2 are nonadjustable, the default is ECG and SpO
2
respectively.

Parameter 3 ~ 5 can be set as OFF, NIBP, RESP, TEMP, CO
2
and CSM etc.
5.2.5 OxyCRG view
1) Description:
In this View, the upper 3 waveform channels are default to ECG II, SpO2 and RESP. The lower area of the waveform area is
Oxycardiorespirogram, which consists of HR trend graph, SpO2 trend graph and Respiration waveform or RR trend graph
within certain time scale. In “OxyCRG View Settings” window, the time scale and the 3rd graph can be changed as needed
(refers to the following section). Settings of the parameter area are similar to that in “General View”.
2) OxyCRG Settings:

Waveform 1 can be set as OFF or one ECG wave.

Waveform 2 and 3 can be set as OFF, SpO
2
and RESP (or CO
2
).

The time scale for OxyCRG can be set as 1min, 2min or 4 min. Min is the time unit of “Minute”.

The 3rd graph in OxyCRG can be set as “RR Trend” or “Resp Wave”.

Parameter 1 and 2 are nonadjustable, the default is ECG and SpO
2
respectively.

Parameter 3 ~ 5, or Parameter 7 can be set as OFF, TEMP, NIBP, RESP, CO
2
and CSM etc.
5.2.6 Short trends view
1) Description:
In this view, several waveform channels can be displayed on waveform area. Trend graphs are on the middle of screen.
The abscissa of trend graph (-2h -0) means various trend of every parameter value from now on to 2 hours before. The
panels of HR, SpO
2
, TEMP, RESP. NIBP and IBP are displayed on parameter area.
2) Short Trends View Settings

Waveform 1 to 3 can be set as OFF or ECG waves. The three ECG waves, if not set to “Off”, should be different from
each other.

Waveform 4 to 5 can be set as OFF, SpO
2
and RESP (or CO
2
) and so on.

Trend 1 is nonadjustable, the default is HR.

Trend 2 ~5 can be set as OFF, TEMP, SpO
2
, RR and S-T and so on.

Parameter 1 and 2 are nonadjustable, the default is ECG and SpO
2
respectively.

Parameter 3~5 can be set as OFF, TEMP, NIBP and RESP (or CO
2
) and so on.