YASKAWA GA800 Series, Техническое описание

Страница: 972 / 1016

12.10 n: Special Adjustment
972 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
■
n8-64: Output Voltage Limit I Time
No.
(Hex.)
Name Description
Default
(Range)
n8-64
(057F)
Expert
Output Voltage Limit I Time
Sets the integral time for output voltage control. Usually it is not necessary to change this setting.
Usually it is not necessary to change this setting.
0.040 s
(0.000 - 5.000)
■
n8-65: Speed Fdbk Gain @ oV Suppression
No.
(Hex.)
Name Description
Default
(Range)
n8-65
(065C)
Expert
Speed Fdbk Gain @ oV
Suppression
Sets the gain of internal speed feedback detection suppression while the overvoltage suppression
function is operating as a magnification value. Usually it is not necessary to change this parameter.
1.50
(0.00 - 10.00)
Adjust this parameter in these conditions:
•
If there is resonance or hunting when you use the overvoltage suppression function, increase the setting value.
•
If motor response is low when you use the overvoltage suppression function, decrease the setting value in 0.05-unit
increments.
■
n8-66: Output Voltage Limit Filter Time
No.
(Hex.)
Name Description
Default
(Range)
n8-66
(0235)
Expert
Output Voltage Limit Filter
Time
Sets the filter time constant for output voltage control. Usually it is not necessary to change this
setting.
0.020 s
(0.000 - 5.000)
■
n8-69: Speed Observer Control P Gain
No.
(Hex.)
Name Description
Default
(Range)
n8-69
(065D)
Expert
Speed Observer Control P
Gain
Usually it is not necessary to change this setting. Sets the Proportional gain that the drive uses for
speed estimation.
1.00
(0.00 - 20.00)
■
n8-70: Speed Observer Control I Time
No.
(Hex.)
Name Description
Default
(Range)
n8-70
(065E)
Expert
Speed Observer Control I
Time
Sets the speed estimator integral time constant. It is available when n8-72 = 1 [Speed Estimation
Method Select = Method 2] . Usually it is not necessary to change this setting.
0.0 s
(0.0 - 100.0 s)
■
n8-71: Speed Observer Control D Gain
No.
(Hex.)
Name Description
Default
(Range)
n8-71
(065F)
Expert
Speed Observer Control D
Gain
Set the speed estimator differential gain. It is available when n8-72 = 1 [Speed Estimation Method
Select = Method 2] . Usually it is not necessary to change this setting.
5.00
(0.00 - 50.00)
■
n8-72: Speed Estimation Method Select
No.
(Hex.)
Name Description
Default
(Range)
n8-72
(0655)
Expert
Speed Estimation Method
Select
Selects the speed estimation method. Usually it is not necessary to change this setting.
1
(0, 1)
0 : Method 1
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV