YASKAWA GA800 Series, Техническое описание

Страница: 979 / 1016

Parameter
Details
12
12.11 o: Keypad-Related Settings
YASKAWA SIEPC71061737B GA800 Drive Technical Reference 979
Note:
•
You can show a maximum of three selected monitors on one LCD keypad screen.
–
When you select only one monitor, the text size of this monitor increases. For example, when o1-25 to o1-35 = 0 , the text size of the
monitor saved in o1-24 increases.
–
When you select two monitors, the text size of these monitors increase.
– When you select four or more monitors, the fourth monitor and all additional monitors are shown on the next screens.
•
Monitors selected with o1-24 to o1-26 can be displayed as a bar graph, analog gauge, or trend plot.
– Bar graph display: 3 monitors maximum
Select with o1-24 , o1-25 , and o1-26 .
–
Analog gauge display: 1 monitor
Select with o1-24 .
–
Trend plot display: 2 monitors
Select with o1-24 and o1-25 .
• You can only set parameters o1-24 to o1-26 with analog output monitors.
• o1-27 to o1-35 let you to select all the monitors.
■
o1-36: LCD Backlight Brightness
No.
(Hex.)
Name Description
Default
(Range)
o1-36
(11B9)
RUN
LCD Backlight Brightness
Sets the intensity of the LCD keypad backlight.
5
(1 - 5)
When you decrease the setting value, the intensity of the backlight decreases.
■
o1-37: LCD Backlight ON/OFF Selection
No.
(Hex.)
Name Description
Default
(Range)
o1-37
(11BA)
RUN
LCD Backlight ON/OFF
Selection
Sets the automatic shut off function for the LCD backlight.
0
(0, 1)
Note:
Use o1-36 [LCD backlight adjustment] to adjust the intensity of the LCD backlight.
0 : OFF
1 : ON
Enables the automatic shut off function. The backlight will automatically turn off after the time set in o1-38 [Time to
turn off LCD backlight] is expired.
Note:
When o1-37 = 1 and the backlight is OFF, the keys other than are disabled.
When the backlight is off, push a key on the keypad to temporarily turn the backlight on. Push any key to start keypad operation, Push
to turn the backlight on, then push again to enter a Run command to the drive.
■
o1-38: LCD Backlight Off-Delay
No.
(Hex.)
Name Description
Default
(Range)
o1-38
(11BB)
RUN
LCD Backlight Off-Delay
Sets the time until the LCD backlight automatically turns off.
60 s
(10 - 300 s)
When o1-37 = 1 [LCD backlight ON/OFF Selection= ON] , the backlight will automatically turn off after the time set
in o1-38 expires.
When the backlight is off, push a key on the keypad to temporarily turn the backlight on. After the backlight turns on,
it will turn off automatically after the time set in
o1-38 is expired.
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV