YASKAWA GA800 Series, Техническое описание

Страница: 843 / 1016

Parameter
Details
12
12.8 H: Terminal Functions
YASKAWA SIEPC71061737B GA800 Drive Technical Reference 843
Table 12.59 Up 2 Command, Down 2 Command
Function
Frequency
Reference Source
d4-03 d4-05 d4-01 Operation
Storing the Frequency Reference or
Frequency Bias
1
Multi-step speed
reference
0.00
0
0
• When the Up 2 Command is active, the drive
accelerates the motor (increases the bias value).
•
When the Down 2 Command is active, the drive
decelerates the motor (decreases the bias value)
• When the Up 2 Command and Down 2
Command are not active and when the Up 2
Command and Down 2 Command are active, the
drive holds the output frequency (holds the bias
value).
• When the frequency changes, it will reset the
bias.
•
For all other statuses, the drive will follow the
frequency reference.
Not stored.
2 1
When the bias value and frequency reference are
constant for 5 seconds after the frequency reference
hold starts, the drive will add the bias value to the
enabled frequency reference, then reset.
3 1 -
• When the Up 2 Command is active, the drive
accelerates the motor.
• When the Down 2 Command is active, the drive
decelerates the motor.
• For all other statuses, the drive will follow the
frequency reference.
Not stored.
4
Multi-step speed
reference
> 0 -
0
• When the Up 2 Command is active, the drive
accelerates the motor to
“
Frequency Ref
d4-03 ” (the bias value will increase to the value
set in d4-03 )
•
When the Down 2 Command is active, the drive
decelerates the motor to
“ Frequency Reference -
d4-03
”
(the bias value will decrease to the value
set in d4-03 ).
• When the Up 2 Command and Down 2
Command are not active and when the Up 2
Command and Down 2 Command are active, the
drive holds the output frequency (holds the bias
value).
• When the frequency changes, it will reset the
bias.
•
For all other statuses, the drive will follow the
frequency reference.
Not stored.
5 1
When the bias value and frequency reference are
constant for 5 seconds after the frequency reference
hold starts, the drive will add the bias value to the
enabled frequency reference, then reset.
6
Others
(Analog input,
transmission)
0 0
0
•
When the Up 2 Command is active, the drive
accelerates the motor (increases the bias value).
• When the Down 2 Command is active, the drive
decelerates the motor (decreases the bias value)
•
When the Up 2 Command and Down 2
Command are not active and when the Up 2
Command and Down 2 Command are active, the
drive holds the output frequency (holds the bias
value).
•
During acceleration or deceleration, when the
frequency reference increases or decreases more
than
d4-07 , the drive holds the bias value until
the output frequency and the actual frequency
reference agree (speed agreement).
Not stored.
7 1
When the bias value is constant for 5 seconds after
the frequency reference hold starts, the drive will
store the bias value in
d4-06 . You cannot rewrite the
frequency reference is not possible. The drive will
store only the bias value.
8
Others
(Analog input,
transmission)
0 1 -
• When the Up 2 Command is active, the drive
accelerates the motor (increases the bias value).
• When the Down 2 Command is active, the drive
decelerates the motor (decreases the bias value)
•
For all other statuses, the drive will follow the
frequency reference.
Not stored.
9
> 0 -
0
•
When the Up 2 Command is active, the drive
accelerates the motor to
“ Frequency Ref
d4-03
”
(the bias value will increase to the value
set in d4-03 )
• When the Down 2 Command is active, the drive
decelerates the motor to
“
Frequency Reference -
d4-03 ” (the bias value will decrease to the value
set in d4-03 ).
•
During acceleration or deceleration, when the
frequency reference increases or decreases more
than
d4-07 , the drive holds the bias value until
the output frequency and the actual frequency
reference agree (speed agreement).
Not stored.
10 1
When the bias value is constant for 5 seconds after
the frequency reference hold starts, the drive will
store the bias value in
d4-06 . You cannot rewrite the
frequency reference is not possible. The drive will
store only the bias value.
■
76: Down 2 Command
Setting Value Function Description
76 Down 2 Command
Sets the function to decrease the frequency reference bias value to decelerate the motor when the terminal is activated. Set this
function and
H1-xx = 75 [Up 2 Command] at the same time.
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV