Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 98 / 938

Getting Started
R&S
®
UPP
82 User Manual 1411.1055.32 ─ 10
Analyzer Function
●
Selection of measurement functions
●
Measurement speed and accuracy
●
Activation of filter and equalizer
●
Activation of Post FFT
●
Selection and settings for level monitor
●
Selection and settings for input monitor
●
Selection and settings for frequency, phase, group delay measurement
●
Selection and settings for waveform monitor
Filter
●
Definition of filter properties
Auxiliaries
●
Settings for the audio monitor
Switcher Panel
●
Operation of one or more R&S UPZ audio switchers
Protocol Generator
●
Settings for the R&S UPP K21 digital audio protocol
Panels which can be selected via the "DispConfig" menu bar button:
Function Config
Level Monitor
Config
Input Config
Freq Phase Config
These four panels contain settings for displaying measured values
●
in the numeric display fields
●
in the associated combo displays
●
and settings for limits, minimum values and maximum values
Sweep Graph Config
FFT Graph Config
Waveform Config
Bar Graph Config
Up to four of each of these panels are available; they contain settings for dis-
playing measurement values in the graphical windows, e.g.
●
One or two-channel display
●
Units, scaling, grid lines, etc.
●
Evaluation of minimum and maximum values
●
Entry of limit curves
●
Settings for cursors and markers
The measurement results of the audio analyzer are shown in the following display win-
dows (for a detailed list of all panels with the most important setting parameters, see
Chapter 4, "Manual Operation" , on page 112).
Except for the Dig Analyzer Protocol window, the panels can be selected via the "Dis-
plays" button in the menu bar:
Numeric Display
●
Display of measurement results for measurement function selected in Ana-
lyzer Function panel
●
Display of measurement results for level monitor and/or input monitor
selected in Analyzer Function panel
●
Frequency measurement results, or frequency measurement result and
phase / group delay measurement result
Funct Ch1 to 2
Lev Mon Ch1 to Ch2
Input Ch1 to Ch2
Freq Ch1
Freq / Phase
These combo displays are extensions to the numeric measurement displays;
they show the respective numeric value plus the following:
●
Analog bar graphs
●
Limits
●
Minimum and maximum values
Brief Introduction to Operation