Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 122 / 938

Getting Started
R&S
®
UPP
106 User Manual 1411.1055.32 ─ 10
c) Open the menu bar and from the selection list under the "DispConfig" button,
select the "FFT Graph 1 Config" panel.
As explained in the previous example, the way in which the measurement
results are presented is determined in the
configuration panels . Each graphi-
cal window has its own configuration panel.
The "FFT Graph 1 Config" panel required here has two columns; to simplify
matters, only Trace A is shown in the example.
d) The associated graphical window can be opened using the "Show" button in
the "Display" field. The window appears in the same screen so that the effect of
the following settings can be observed directly.
e) In each FFT window, one or two traces (Trace A and Trace B) can be plotted
on the frequency axis.
In this example, the level measurement results of the FFT analysis are to be
displayed on a graph. For Trace A, the "Source" field is therefore set to "FFT
Level" and "Channel"to Ch1 (this is already preset in the default setup).
The "Alive" setting means that the results are displayed continuously; the
"Hold" setting "freezes" the traces.
Introduction to Instrument Operation Using Examples