Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 587 / 938

Instrument Functions
R&S
®
UPP
571 User Manual 1411.1055.32 ─ 10
10: Config
Right-clicking anywhere opens a context menu, left-clicking opens the corresponding
DispConfig panel.
5.47.2 Calling Up
A data list button can be found in the first line of every display configuration panel
and can be used to open a measured value list for each graphic system or for addi-
tional graphic display.
Trace A, Trace B and the associated x-axes are displayed as numeric values in a
maximum of four columns.
The column on the left-hand side contains the number of the measured value, a col-
ored marking indicating the row containing the value at which the cursor is located and
may also contain colored arrow symbols indicating the direction in which a cursor left
the display window. Pressing the "Find Cursor " softkey adjusts the display window so
that the data set appears together with the cursor at the center of the display.
In the columns for the Y values of Trace A and Trace B digits highlighted in color by
pressing the "Selection" softkey indicate whether the measurement result is violating
the "Limit
Upper" and/or "Limit Lower" parameters or whether the value is a harmonic
or a peak.
Hidden sections of the data set can be shown in the display window using the scrollbar
on the right-hand side of the panel or using the blue selection frame.
5.47.3 Parameter Fields of the Panel
The result list does not have its own panel; it is configured according to the settings in
the display configuration panel from which it was opened.
The following parameter fields and softkey functions affect the result list (and, at the
same time, the traces and bar graphs):
Unit Funct Track
Used to determine whether the unit is the same as that set in the analyzer or whether it
can be user-selected.
Unit
The unit set here is displayed above the measurement result column for Trace A,
Trace B or above the values on the x-axis:
Result List