Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 581 / 938

Instrument Functions
R&S
®
UPP
565 User Manual 1411.1055.32 ─ 10
"Level 1 " "Level 2 " "Level 3 " "Level 4 " Brief description
"Lim Viol B " Ditto for Trace B
"Lim Viol A+B " Ditto for Trace A and
Trace B
"Back " Move back by one menu
level
"Config " Opens associated Config
panel
5.46.5 Single Scan
For the two independent y-axes (Trace A and Trace B) on the graphical display, the
user can display two out of eight simultaneously acquired measured values. These can
include not only level measurement results, frequencies or total harmonic distortions
from the left and right channels, but also physically different values such as voltage
and phase. The measurement function relevant to the measured value display is set in
the Analyzer Function panel, and the measurement function relevant to the trace dis-
play is selected from the Graphics Configuration panel at "Y-Source".
The graph shows a single sweep on Trace A (green) and Trace B (yellow).
In addition the setting
produces two further scans in which the Min and Max curves are generated, exactly as
in the following graph which shows a crowded set of curves.
5.46.6 Trace Group
With the R&S UPP, the number of measurement sequences is not restricted to one
scan. Instead, it can be set for the Sweep Graphs 1 to 4 graphics system (see Chap-
ter 5.46.1, "Graphical Display, Explanation of the Elements" , on page 500).
Curve, Spectrum and Bar Graph Display