Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 210 / 938

Manual Operation
R&S
®
UPP
194 User Manual 1411.1055.32 ─ 10
Number in red Measuring range has been overranged; this can occur if:
●
Range Fix setting is being used
●
A signal with a level at range limit is applied with a crest factor > 2
●
Common-mode voltage is applied in BAL input configuration
Number in black Measuring range has been underranged; this can occur if Range Fix or Lowest
setting is being used
Other status display
Single Single measurement is being performed
Cont Continuous measurement is being performed
Terminated Single measurement has been terminated
Stopped Measurement has been stopped
Wait for Trigger Analyzer is waiting for set trigger condition
Generator status
Gen Off Generator is deactivated
Gen Running Generator signals are being output
Output Off All output lines are deactivated
Gen Overload Generator has been deactivated owing to overload
Sweep status
Sweep Off No sweep is being performed
Sweep Waiting Sweep has been defined but not yet started
Sweep Terminated Single sweep has been terminated
Sweep Stopped Sweep has been stopped but can be continued
Sweep Run Cont Continuous sweep is being performed
Sweep Run Single Single sweep is being performed
Sweep Run Manual Manual sweep is being performed
Overview of Status Messages