Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 740 / 938

Remote Control - Command Description
R&S
®
UPP
724 User Manual 1411.1055.32 ─ 10
Manual operation: See "Chx Range" on page 307
SENSe[1]:VOLTage:RANGe<n3>:VALue <value>
Suffix:
<n3>
.
<n3> = 1 with setting
INPut:RANGe:CHANnels TRACk
.
<n3> = 1 to 8 with setting
INPut:RANGe:CHANnels SPLit
. It
denotes channel 1 to 8.
Parameters:
<value> float
range nominal value or any voltage value
Manual operation: See "Chx Range" on page 307
Table 7-1: Table for analog Analyzer
value = 200 mV (0.00 ... 0.21999 V)
value = 800 mV (0.22 ... 0.87999 V)
value = 3 V (0.88 ... 3.29999 V)
value = 12 V (3.3 ... 13.19999 V)
value = 50 V (13.2 ... 55.00 V)
The query response to this command returns the range nominal value in Volts, e.g.,
SENSe:VOLTage:RANGe2:VALue?
Response =
0.8
for the range 800 mV RMS
Any voltage value can be specified instead of the range nominal value to specifically
set the respective measurement range. This range is shown in brackets.
7.4.3 Configuring the Digital Analyzer
The settings for the digital analyzer are performed in the
INPut
and
SENSe
subsys-
tems.
●
INPut[1]:AUDiobits
on page 725
●
INPut[1]:CHANnel
on page 725
●
INPut[1]:FILTer
on page 773
●
INPut[1]:SAMPle:FREQuency
on page 725
●
INPut[1]:SAMPle:FREQuency:MODE
on page 725
●
INPut[1]:TYPE
on page 725
●
SENSe[1]:MAX:FFT:SIZE
on page 723
Analyzer Settings