Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 458 / 938

Instrument Functions
R&S
®
UPP
442 User Manual 1411.1055.32 ─ 10
"Consumer" The channel-status bits are always interpreted in Consumer format in
accordance with the IEC 60958-3 standard regardless of the state of
bit #0. This avoids the possibility that a bit error in bit #0 might cause
the display format to switch over.
"Professional" The channel status bits are always interpreted in Professional format
in accordance with the IEC 60958-4 or AES3 standard regardless of
the state of bit #0. This avoids the possibility that a bit error in bit #0
might cause the display format to switch over.
Remote command:
SENSe8:PROTocol:MODE
on page 768
Highlight
For defining whether and if so when channel-status information is to be highlighted.
Highlighted channel-status information is displayed in red instead of black.
"Nothing" Channel-status information is not highlighted.
"From Output" Changes compared to the channel-status information generated by
the R&S
UPP generator are highlighted.
This setting is only worthwhile when the internal generator is used
and channel-status information is being generated.
"Between
Channels" Differences between the two channels are highlighted. The differen-
ces are displayed on both channels.
For the HDMI protocol analysis, the channels are always represented
as identical, therefore the setting is without effect in this case.
"Changes" This is for highlighting all changes since the start of the measure-
ment, that is, since the [START ] key was last used.
Remote command:
SENSe8:PROTocol:HIGHlight
on page 768
Persistence
For defining how long a highlight should stay.
Regardless of the setting selected here, all highlighting is reset when the [START ] key
is used.
"Short" Highlighting is only brief and is reset after one second.
"Long" Highlighting is reset after five seconds.
"Forever" Highlighting is never reset.
Protocol Analysis