Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 565 / 938

Instrument Functions
R&S
®
UPP
549 User Manual 1411.1055.32 ─ 10
"Auto" Automatic engineering assignment from p to M. The cursor and scal-
ing values are displayed
with the engineering symbol.
The x-axis is labeled with the unit without engineering.
"Off" Engineering is deactivated.
Values are always displayed in 1.0
E 0
"µ, m, k" Engineering fixed to µ, m or k.
The values to be displayed are multiplied by the factor 1.0
E
6
, 1.0 E
3
or 1.0 E -3 .
The cursor and scaling values are displayed without engineering
symbol.
The x-axis is labeled
with Engineering and Unit.
Label Auto
Used to determine whether the x-axis label is the same as that set in the x-axis param-
eter field or whether the label can be user-selected.
Available in the graphics subsystems
Sweep, FFT, Waveform
"activated"
The label in the x-axis parameter field is displayed in gray (cannot be
accessed) in the text field to the right of the checkbox and also on the
x-axis in the graphical display.
"deactivated"
A user-definable label appears on the x-axis of the graphical display.
Remote command:
DISPlay:SWEep<n2>:X:LABel:AUTO
on page 801
DISPlay:SWEep<n2>:X:LABel:USER
on page 801
Curve, Spectrum and Bar Graph Display