Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 604 / 938

Instrument Functions
R&S
®
UPP
588 User Manual 1411.1055.32 ─ 10
Reference
Figure 5-28: Reference menu for two and multichannel instruments
Used to select the reference for referenced units for the measurement result.
"Value " A numeric value with unit must be entered as the reference value in
the parameter field below.
Note: If manual switchover is made from a variable reference value
(Meas Ch1, Meas Ch2, Gen Track) to Value, the fixed reference
value (Value) last valid will be restored.
"Store" The current measurement result of a single
‑
channel measurement is
stored under Value when the [ENTER] key is pressed or the mouse
key is clicked; this measurement result is then displayed as the new
reference value. The reference value does not change while mea-
surements are being performed. This option is only available for
1
‑
channel measurement.
"Store Ch1 ... " The current measurement result for the specified channel is stored
under Value when the [ENTER] key is pressed or the mouse key is
clicked; this measurement result is then displayed as the new refer-
ence value. The reference value does not change while measure-
ments are being performed. These options are only available for
two
‑
channel or multichannel measurement.
"Meas Ch1, Meas Ch2 "
These options are only available for two
‑
channel measurement.
Every level measurement result for channel 1 or channel 2 is stored
as the reference value. If a referenced unit has been selected in the
"Unit" parameter field, the measurement result is referenced to this
variable reference value and displayed.
"Meas Ref Ch" This option is only available for multichannel instruments.
Every level measurement result of the channel specified in the Ana-
lyzer Config panel under "Ref Channel "
is saved as a reference value. If a referenced unit has been selected
in the Unit parameter field, the measurement result is referenced to
this variable reference value and displayed.
Combi Display