Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 164 / 938

Manual Operation
R&S
®
UPP
148 User Manual 1411.1055.32 ─ 10
For the analog analyzer instrument, the Config panels are offered as a single column
since the settings apply uniformly to all channels. For the other analyzer instruments,
the Config panels are offered in two columns since each channel can be configured by
itself.
Some of the basic settings in these panels are described here using the "Lev Mon
Config" panel as an example. Since the combo display is an extension of the numeric
display field, the settings also influence the numeric display field.
For a detailed description of the display options, see Chapter 5.48.1, "Graphical Dis-
play, Explanation of the Elements" , on page 575.
Some of the settings described below are only visible if the combined display is of ade-
quate size on the screen. For example, scaling and grid lines are hidden automatically
and stepwise if the display is reduced in size.
●
Unit of measurement result
This parameter field is used to set the unit for the measurement result display. The
units available in the parameter list depend in the type of measurement.
An overview with all the units that occur for the audio analyzer and their conversion
formulas is located in
Chapter 4.17, "Units" , on page 183.
Details concerning the numeric value display can be specified here for all linear
units.
For example, it is possible to select whether voltage is to be given in V, mV, µV,
and so on. If "Auto" is set, these unit prefixes are automatically adapted to the
measured value.
●
Reference values
Measurement Displays