Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 511 / 938

Instrument Functions
R&S
®
UPP
495 User Manual 1411.1055.32 ─ 10
"UPx Window" This setting outputs the entire screen of the R&S UPP as a bitmap.
This is the default after firmware installation.
"Act. Graphics" This setting outputs the momentarily active graphical window as a
vector graphic. This applies to the FFT Graph, Waveform, Bargraph
and Sweep Graph graphics. The type of graphic depends on the tar-
get device.
Remote command:
HCOPy:SOURce
on page 829
Destination
Selection of the destination for the screen content to be output.
"Printer" The screen content selected under "Source" is output direct to the
printer set as the default printer under Windows. Graphs are output in
vector format, screenshots as bitmaps.
"File" The screen content selected under "Source" is output to a file speci-
fied under "File Name". The output is always as bitmap.
"Clipboard"
The screen content selected under "Source" is output direct to the
Windows clipboard and can be used direct in other applications. The
output is always as bitmap.
Note: If the instrument is being remotely controlled from the Windows
Remote Desktop, the "Clipboard" setting allows you to transport
graphics direct between the instrument and the host computer.
Remote command:
HCOPy:DESTination
on page 829
Graph Size
Resolution for bitmaps of graphic windows.
A change to the resolution is only provided for the "Source" = Active Graphic and "Des-
tination" = File | Clipboard settings.
The setting made here remains unaffected by preset or by loading a setup; it is there-
fore bound to the device.
Config panel