Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 508 / 938

Instrument Functions
R&S
®
UPP
492 User Manual 1411.1055.32 ─ 10
B vs A
For entering the channel offset between the busbars A and B, in common for input and
output switchers.
This operator field only appears when tracking "B vs A" or "All" is selected.
Remote command:
SWITcher:OFFSet:BVSA
on page 780
Out vs Inp
For entering the channel offset between input and output switchers.
This operator field only appears when tracking "Out vs Inp" or "All" is selected.
Remote command:
SWITcher:OFFSet:OVSI
on page 780
Input A
For entering the channel number of the input switcher that is to be connected to busbar
A.
It is not possible to set this channel to busbar B. If this is attempted, a correction is
made to the next higher or next lower channel number.
Remote command:
SWITcher:INPA
on page 779
Input B
For entering the channel number of the input switcher that is to be connected to busbar
B.
It is not possible to set this channel to busbar A. If this is attempted, a correction is
made to the next higher or next lower channel number.
Remote command:
SWITcher:INPB
on page 779
Output A
For entering the channel number of the output switcher that is to be connected to bus-
bar A. This setting changes its significance when -1 is set under "Output B", see under
that section.
It is not possible to set this channel to busbar B. If this is attempted, a correction is
made to the next higher or next lower channel number.
Remote command:
SWITcher:OUTA
on page 780
Output B
Used to enter the channel number of the output switcher that is to be connected to
busbar B. Here it is possible to enter "-1" as the channel number. The result is that
all
channels of all connected switchers are closed in busbar B, with the exception of the
one that is selected in busbar A. This setting is useful for worst-case crosstalk mea-
surements. If no channel is selected in busbar A ("Output A" = 0), all channels in bus-
bar B are closed.
Switcher Panel