Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 513 / 938

Instrument Functions
R&S
®
UPP
497 User Manual 1411.1055.32 ─ 10
Store Mode
Selection of the mode for output to a file.
Only available if "Destination" is set to File.
"New" Pressing [H Copy] opens the file selection box in which you enter the
name of the destination file. See also the section
Chapter 5.58.1,
"Saving Setups" , on page 630.
"Overwrite" Output is always to the file of "Filename"", which is overwritten with-
out asking you each time.
"Autoincre-
ment" Output is to a file whose name is composed of two parts: The begin-
ning of the filename is the name entered as "Filename"", followed by
a consecutive number that is incremented by 1 every time you press
[H Copy].
Remote command:
HCOPy:FILE:MODE
on page 829
Filename
Selection of the desired filename for the output to a file. Only available if "Destination"
is set to File and "Store Mode" is not set to New. The file selection box opens for you to
change the filename (see section
Chapter 5.57, "Loading and Saving" , on page 629).
Enter the filename without an extension; the "File Type" setting in the file selection box
defines the file type.
Remote command:
HCOPy:FILE
on page 829
Menu bar always visible
Permanently displays the menu bar.
The audio analyzer allows you to have the menu bar displayed at the top edge of the
screen all the time. This feature is primarily for mouse operation.
"activated" The menu bar is permanently displayed on the top edge of the
screen.
"deactivated" The menu bar appears at the top edge of the screen when you move
the mouse pointer to the left-hand edge of the screen. The bar disap-
pears again after a function has been selected.
Remote command:
-
Toolbar always visible
Permanently displays the toolbar.
Config panel