Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 519 / 938

Instrument Functions
R&S
®
UPP
503 User Manual 1411.1055.32 ─ 10
in which the desired scan can be selected by clicking the appropriate number. The cur-
sors, markers, limit values and so on are then referenced to this scan.
11: Softkey bar
The softkey menu for the graphical window allows quick configuration of all the impor-
tant and frequently used settings, especially cursor, marker, and zoom functions, or by
clicking with the mouse.
See Chapter 5.46.3, "Parameter Fields of the Panel" , on page 508.
12: Label of x-axis
Only for displaying curves, not in graphic system Bargraph1 | 2:
Consists of the label and unit; set with
See Chapter 5.46.3, "Parameter Fields of the Panel" , on page 508.
13: Limit display
"Limit Upper"
Limit Upper is activated and there is no limit violation.
"Limit Lower"
Limit Lower is activated and there is no limit violation.
"Limit Upper
past"
The "Limit Upper" value has been violated in the past but there is cur-
rently no limit violation. The violation is indicated until the [START ]
key is pressed again.
"Limit Lower
past"
The "Limit Lower" value has been violated in the past but there is cur-
rently no limit violation. The violation is indicated until the [START ]
key is pressed again.
"Limit Upper
current"
The "Limit Upper" value is currently being violated.
"Limit Lower
current"
The "Limit Lower" value is currently being violated.
Curve, Spectrum and Bar Graph Display