Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 97 / 938

Getting Started
R&S
®
UPP
81 User Manual 1411.1055.32 ─ 10
3.3.4.5 Messages During Operation
When the "Set to reference" button is clicked, messages that indicate problems can
appear. For example, "Set to reference" is only effective if the Y axis of the graphical
display is set to the unit dBr. If this is not the case, an info box indicating this appears.
3.3.4.6 Settings Outside Quickstart Panel
Settings made at a later time outside the quickstart panel, i.e. in the standard user
interface of the R&S UPP audio analyzer, will result in inconsistencies between the set-
tings in the quickstart panel and the actual setup of the R&S UPP audio analyzer; mak-
ing subsequent settings outside the quickstart panel may, however, be necessary. The
message "Operations outside Quickstart Panel detected! QSP display might be differ-
ent!" in the user info line (line above the softkey bar) alerts the user to this as a precau-
tion. Reselecting a "Measurement Task" will cancel out any inconsistencies in the set-
tings.
3.3.5 Structure of the Panels and Display Windows
The R&S UPP audio analyzer features the following panels with their main settings (for
a detailed list of all panels with the most important setting parameters, see
Chapter 4,
"Manual Operation" , on page 112).
Panels which can be selected via the "Instruments" menu bar button:
Generator Config
●
Selection of instrument (analog or digital interfaces)
●
Configuration of channels and bandwidths
●
Reference values
Generator Function
●
Selection of test signals
●
Sweep function
●
Frequency and level settings
●
Filter and equalizer
●
DC Offset
Analyzer Config
●
Selection of instrument (analog or digital interfaces)
●
Configuration of channels, measuring bandwidth and pre-filter
●
Range configuration
●
Reference values
●
Start and trigger conditions
Brief Introduction to Operation