Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 678 / 938

Remote Control - Fundamentals
R&S
®
UPP
662 User Manual 1411.1055.32 ─ 10
In this way it is very easy to produce the matching IEC/IEEE bus control program from
a manual control sequence without having to look up the commands in the manual.
This also eliminates malfunctions through the wrong notation.
From the Config Panel (Menu * Utilities * Config Panel), you can select whether to use
the short or long form of the command parameters when querying parameters.
Remote-control command:
SYSTem:QLONg ON | OFF
Example: If the analog generator has been set to "Output Type" = Bal, the query
OUTPut:TYPE?
returns
BAL
in the short form and
BALanced
in the long form.
6.7.1 Starting Recording
Open the window through the "Menu" by "Sequence" * "SCPI Recording"
6.7.2 Recording Commands
As long as the SCPI Recording window is opened, almost all settings of manual control
are recorded.
Keys of the frontpanel and the softkeys of the "Display Panel" can not be recorded.
In this example, the generator frequency was set to 1024.5 Hz and the level to 0.5 V.
Command Recording