Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 539 / 938

Instrument Functions
R&S
®
UPP
523 User Manual 1411.1055.32 ─ 10
"deactivated"
A user-definable label appears on the y-axis of the graphical display.
Figure 5-25: Here rotated by 90°.
Remote command:
DISPlay:SWEep<n2>:A:LABel:AUTO
on page 790
DISPlay:SWEep<n2>:A:LABel:USER
on page 791
DISPlay:SWEep<n2>:B:LABel:AUTO
on page 790
DISPlay:SWEep<n2>:B:LABel:USER
on page 791
Alive / Hold
Available in all graphic subsystems
Used to enable or freeze the display of new measured values for Trace A or Trace B
(refer also to Chapter 5.51, "Measured value Sequences" , on page 601).
"Alive" New measured values are displayed.
"Hold" The last trace remains in the display.
Remote command:
DISPlay:SWEep<n2>:A:UPDate
on page 797
DISPlay:SWEep<n2>:B:UPDate
on page 797
Reference
Used to select the reference for referenced units (e.g. dBr, V/Vr or ΔHz) for Trace A or
Trace B.
Can be a single integer value or a reference trace. The reference can be a sequence
of measured values, the current generator frequency or voltage, or it can be loaded
from a file (e.g. as a reference trace).
The reference value applies to all integer values in the trace, i.e. measured values, top,
bottom and limit values, as well as to all scans of a trace. The same reference value
thus applies to all scans.
Curve, Spectrum and Bar Graph Display